Xenon Arc Chamber Tabletop Flat Array
The Q-SUN Xe-1 xenon arc chamber reproduces the damage caused by full-spectrum sunlight, which is more economical, highly efficient, and very low-maintenance, with dual touchscreen displays is more user friendly.
- Q-SUN Xe-1-BE : Light
- Q-SUN Xe-1-SE : Light +Spray
- Q-SUN Xe-1-BCE : Light +Chiller (near room temperature)
- Q-SUN Xe-1-SCE : Light +Spray +Chiller (near room temperature)
- Q-SUN Xe-1-WE : Light +Water Immersion
Simple user interface in 17 user-selectable languages: English, Spanish, French, German, Italian, Japanese, Chinese, Korean, Czech, Dutch, Polish, Portuguese, Russian, Swedish, Thai, Turkish, Vietnamese
1. Xenon Arc Lamps for Full-Spectrum Light
The Q-SUN Xe-1 tester
uses a single, air-cooled xenon arc lamp. Typical lamp life for Q-Lab’s “plus” lamps is
3000 hours at typical irradiance, and 1000 hours at high irradiance.
2. Optical Filters
Xenon light must be
properly filtered to achieve the appropriate spectrum for each particular
application. The three
categories of filters shown below are available to simulate a variety of
service environments.
3. Temperature Monitoring & Control
Control of temperature is important because it influences the rate of degradation for many materials. Specimen exposure temperature is precisely controlled in the Q-SUN Xe-1 tester using a black panel temperature sensor.
The temperature can be set, depending upon whether the black panel sensor is insulated or uninsulated, as well as irradiance level, filter type, lamp age and ambient room temperature.
4. Versatile Specimen Mounting
The flat specimen mounting tray in the Xe-1 tester accommodates different shapes and sizes of specimens, including three-dimensional parts. A variety of specimen holders are available.
5. Water Repurification System
To significantly reduce the cost of running the Q-SUN Xe-1 tester’s optional water spray system, Q-Lab offers a Water Repurification System that reuses the water that normally would go down the drain.
|
Model |
Xe-1-BE Xe-1-SW |
Xe-1-BCE Xe-1-SCE |
Xe-1-WE |
|||
|
Black
Panel Type(℃) Light + Immersion Dark + Immersion |
BP - - |
IBP 50-100 45-80 25-50 - - |
BP - - |
IBP 25-100 20-80 10-50 - - |
BP 35-55 30-50 |
IBP 35-55 30-50 |
|
Chamber
Air Temp(℃) |
35
- 55 |
15-55 10-40 |
- - |
|||
|
Relative Humidity |
N/A |
|||||
|
Specimen Area |
25 x 46 cm |
|||||
|
Specimen Capacity (qty @ size) |
17 @ 51 × 102 mm (2 × 4 in) |
15 @ 51 × 102 mm (2 × 4 in) |
||||
|
Max Specimen Weight |
14 kg |
|||||
|
Inlet Water Pressure |
All non-"S",
non-"W" models: 0.7-6.2 bar (10-90 psi) |
|||||
|
Inlet Water Purity |
All non-“S”, non-“W” models :
<2.5 ppm |
|||||
|
Water Consumed with Spray On |
0.12 L/min |
0.12 L/min |
~ 0.0 L/min |
|||
|
External Dimensions (w × h × d) |
78 x 52 x 65 cm |
78 x 138 x 79 cm (Xe-1 + Chiller) |
99 x 72 x 65 cm |
|||
|
Weight |
50 kg |
124 kg |
88 kg |
|||
|
Electrical Requirements |
208/230V ± 10% 1-Ф,12A/11A, 50/60 Hz |
208/230V ± 10% 1-Ф,19A/16A, 50/60 Hz |
208/230V ± 10% 1-Ф,13A/12A, 50/60 Hz |
|||
|
Lab Recommendations Temperature (°C) Relative Humidity (%) |
23 ± 5℃ 50 ± 25% |
|||||
